EASY SETUP. 5 SIMPLE STEPS.

Remove the Black Caps
Remove the protective caps from both sides of the pump.

Secure the Hoses
Attach the inlet and outlet hoses and tighten the hose clamps for a secure connection.

Connect to Your 12V Battery
With the pump switched off, connect the red clamp to the positive (+) terminal and the black clamp to the negative (–) terminal.

Position the Inlet and Outlet Hoses
Insert the inlet tube into the dipstick opening to reach the oil. Place the outlet hose into a waste oil container.

Switch On the Pump
Press the built-in power switch to start extracting oil. Switch off when extraction is complete—do not run the pump dry.

SECURE CONNECTIONS. CLEANER OIL TRANSFER.

Keep oil moving through the hoses with less mess and fewer spills. The hose clamps hold each tube firmly in place, helping create a secure seal at the inlet and outlet connections. Attach the hoses in the correct flow direction and tighten both clamps before pumping to help prevent leaks and keep old oil flowing into your waste container.

UPGRADED OVERCURRENT PROTECTION

Built-in overcurrent protection automatically reduces power when cold, thick oil puts extra strain on the pump. This helps protect the motor from overload and burnout, adding protection during oil extraction.

ONE PUMP. MULTIPLE ENGINES.

From your home garage to outdoor equipment, make DIY oil changes easier with one versatile pump. Use it with compatible cars and trucks, motorbikes, jet skis, small marine engines, generators, lawn mowers, wood chippers, and ATVs/UTVs. Handle more maintenance yourself and save on labor costs—with one compact tool for multiple jobs.

SPECIFICATIONS & WHAT’S INCLUDED

Powered by a 12V connection, the 80W oil extractor pump comes with inlet and outlet hoses plus clamps for setup.

Specifications

• Material: Plastic
• Voltage: 12V
• Power: 80W
• Flow Rate: 0.13 GPM
• Current: 6.7A
• Duty Cycle: 30 minutes

Included Accessories

• 1 × Inlet Hose: 6mm × 1200mm
• 1 × Outlet Hose: 12mm × 1500mm
• 2 × Hose Clamps